Individual prices for resellers. Made in the EU. 9in/16out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 16 users With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 16 TV sets!! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0 or 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 82 dBµV avg (active). 50 mA (18 V). From internal power supply. 3 W (passive) 4.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 9/16 (9×16) (9inputs, 16outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

• Number of Outputs: 16
• Model: MS9/16PIU-6
• Modified Item: No
• MPN: MS9/16PIU-6
• Country/Region of Manufacture: Czech Republic
• Custom Bundle: No
• Number of Inputs: 9
• Brand: EMP – Centauri
• Type: Wideband Multiswitch

Individual prices for resellers. Made in the EU. 13in/12out standalone multiswitch for distribution of 12 SAT IF signals including terrestrial for up to 12 users With this multiswitch, you can receive all satellite TV signals from up to 3 different satellites simultaneously at 12 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 13/12 (13×12) (13inputs, 12outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

• Number of Outputs: 12
• Model: MS13/12PIU-6
• Modified Item: No
• MPN: MS13/12PIU-6
• Country/Region of Manufacture: Czech Republic
• Custom Bundle: No
• Number of Inputs: 13
• Brand: EMP – Centauri
• Type: Wideband Multiswitch

Individual prices for resellers. Made in the EU. 13in/16out standalone multiswitch for distribution of 12 SAT IF signals including terrestrial for up to 16 users With this multiswitch, you can receive all satellite TV signals from up to 3 different satellites simultaneously at 16 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 13/16 (13×16) (13inputs, 16outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

• Number of Outputs: 16
• Model: MS13/16PIU-6
• Modified Item: No
• MPN: MS13/16PIU-6
• Country/Region of Manufacture: Czech Republic
• Custom Bundle: No
• Number of Inputs: 13
• Brand: EMP – Centauri
• Type: Wideband Multiswitch

Individual prices for resellers. Made in the EU. 17in/16out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 16 users With this multiswitch, you can receive all satellite TV signals from up to 4 different satellites simultaneously at 16 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). 13 V, 0 kHz, DiSEqC D (4). 18 V, 0 kHz, DiSEqC D (4). 13 V, 22 kHz, DiSEqC D (4). 18 V, 22 kHz, DiSEqC D (4). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 17/16 (17×16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

• Model: MS17/16PIU-6
• Modified Item: No
• Country/Region of Manufacture: Czech Republic
• Custom Bundle: No
• Type: Wideband Multiswitch
• Number of Outputs: 16
• MPN: MS17/16PIU-6
• Number of Inputs: 17
• Brand: EMP – Centauri

Individual prices for resellers. Made in the EU. 13in/26out standalone multiswitch for distribution of 12 SAT IF signals including terrestrial for up to 26 users With this multiswitch, you can receive all satellite TV signals from up to 3 different satellites simultaneously at 26 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 13/26 (13×26) (13inputs, 26outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

• Number of Outputs: 26
• Model: MS13/26PIU-6
• Modified Item: No
• MPN: MS13/26PIU-6
• Country/Region of Manufacture: Czech Republic
• Custom Bundle: No
• Number of Inputs: 13
• Brand: EMP – Centauri
• Type: Wideband Multiswitch