17inputs | Satellite Multi Switch

Tag Archives: 17inputs

Satellite multiswitch 17/16 (17×16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY

- admin
- April 15, 2019
- April 15th, 2019
- satellite
- 16outputs 17inputs 17x16 4yrs made multiswitch satellite wnty

Satellite multiswitch 17/16 (17x16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY

Individual prices for resellers. Made in the EU. 17in/16out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 16 users With this multiswitch, you can receive all satellite TV signals from up to 4 different satellites simultaneously at 16 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). 13 V, 0 kHz, DiSEqC D (4). 18 V, 0 kHz, DiSEqC D (4). 13 V, 22 kHz, DiSEqC D (4). 18 V, 22 kHz, DiSEqC D (4). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 17/16 (17×16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

Model: MS17/16PIU-6
Modified Item: No
Country/Region of Manufacture: Czech Republic
Custom Bundle: No
Type: Wideband Multiswitch
Number of Outputs: 16
MPN: MS17/16PIU-6
Number of Inputs: 17
Brand: EMP – Centauri

Satellite multiswitch MS9/40EEU-13 (17inputs, 40outputs), Made in EU, 4yrs. WNTY

- admin
- January 25, 2016
- January 25th, 2016
- satellite
- 17inputs 40outputs 4yrs made ms940eeu-13 multiswitch satellite wnty

Individual prices for resellers. Made in the EU. 9in/40out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 40 users With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 40 TV sets! For indoor use only. 5-862 MHz (passive) 40-862 MHz (active). 5-2150 MHz (passive) 40-2150 MHz (active). DiSEqC 1.0 (2.0). 10 dB (950 MHz) – 0 dB (2150 MHz). 30 ± 4 dB. 3 ± 4 dB. 110 dBµV avg (passive) 85 dBµV avg (active). 80 dBµV avg (passive) 82 dBµV avg (active). 70 mA (18 V). From external power supply. 11 W (passive) 13 W (active) + LNB. 150 mA max (12 V DC). Dimensions (w, d, h). 35.5 x 35.0 x 5.0 cm. [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. Terminate all unused outputs by 75 ohm loads, if terrestrial band is used. A suitable cascadable unit can be placed before to extend the number of available outputs. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS9/40EEU-13 (17inputs, 40outputs), Made in EU, 4yrs. WNTY” is in sale since Saturday, January 23, 2016. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

Number of Inputs: 9
Number of Outputs: 40
Brand: EMP – Centauri
Model: MS9/40EEU-13
MPN: MS9/40EEU-13
Country/Region of Manufacture: Czech Republic

Satellite multiswitch MS17/40EEU-13 (17inputs, 40outputs), Made in EU, 4yrs. WNTY

- admin
- January 23, 2016
- January 23rd, 2016
- satellite
- 17inputs 40outputs 4yrs made ms1740eeu-13 multiswitch satellite wnty

Individual prices for resellers. Made in the EU. 17in/40out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 40 users With this multiswitch, you can receive all satellite TV signals from up to 4 different satellites simultaneously at 40 TV sets! For indoor use only. 5-862 MHz (passive) 40-862 MHz (active). 5-2150 MHz (passive) 40-2150 MHz (active). DiSEqC 1.0 (2.0). 10 dB (950 MHz) – 0 dB (2150 MHz). 30 ± 4 dB. 5 ± 4 dB. 110 dBµV avg (passive) 85 dBµV avg (active). 80 dBµV avg (passive) 82 dBµV avg (active). 100 mA (18 V). From external power supply. 19 W (passive) 21 W (active) + LNB. 150 mA max (12 V DC). Dimensions (w, d, h). 35.5 x 35.0 x 5.0 cm. [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (2). 18 V, 0 kHz, DiSEqC C (2). 13 V, 22 kHz, DiSEqC C (2). 18 V, 22 kHz, DiSEqC C (2). 13 V, 0 kHz, DiSEqC D (2). 18 V, 0 kHz, DiSEqC D (2). 13 V, 22 kHz, DiSEqC D (2). 18 V, 22 kHz, DiSEqC D (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. Terminate all unused outputs by 75 ohm loads, if terrestrial band is used. A suitable cascadable unit can be placed before to extend the number of available outputs. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS17/40EEU-13 (17inputs, 40outputs), Made in EU, 4yrs. WNTY” is in sale since Saturday, January 23, 2016. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

Number of Inputs: 17
Number of Outputs: 40
Brand: EMP – Centauri
Model: MS17/40EEU-13
MPN: MS17/40EEU-13
Country/Region of Manufacture: Czech Republic

Satellite multiswitch MS17/20ECP-12 (17inputs, 20outputs), Made in EU, 4yrs. WNTY

- admin
- December 5, 2015
- December 5th, 2015
- satellite
- 17inputs 20outputs 4yrs made ms1720ecp-12 multiswitch satellite wnty

Made in the EU. 17in/20out standalone multiswitch for distribution of 16 SAT IF signals including passive terrestrial for up to 20 users. DiSEqC 1.0 (2.0) commands. 100 mA (18 V). Dimensions (w, d, h). 18.6 x 24.5 x 5.1 cm. The item “Satellite multiswitch MS17/20ECP-12 (17inputs, 20outputs), Made in EU, 4yrs. WNTY” is in sale since Thursday, April 24, 2014. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “emp-centauri” and is located in Klatovy, CZECH REPUBLIC. This item can be shipped worldwide.

Number of Inputs: 17
Number of Outputs: 20
Brand: EMP – Centauri
Model: MS17/20ECP-12
MPN: MS17/20ECP-12
Country/Region of Manufacture: Czech Republic

Satellite multiswitch MS17/60EEU-13 (17inputs, 60outputs), Made in EU, 4yrs. WNTY

- admin
- November 23, 2015
- November 23rd, 2015
- satellite
- 17inputs 4yrs 60outputs made ms1760eeu-13 multiswitch satellite wnty

Individual prices for resellers. 17in/60out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 60 users With this multiswitch, you can receive all satellite TV signals from up to 4 different satellites simultaneously at 60 TV sets! For indoor use only. 5-862 MHz (passive) 40-862 MHz (active). 5-2150 MHz (passive) 40-2150 MHz (active). DiSEqC 1.0 (2.0). 10 dB (950 MHz) – 0 dB (2150 MHz). 35 ± 4 dB. 5 ± 4 dB. 110 dBµV avg (passive) 85 dBµV avg (active). 76 dBµV avg (passive) 80 dBµV avg (active). 100 mA (18 V). From external power supply. 19 W (passive) 21 W (active) + LNB. 150 mA max (12 V DC). Dimensions (w, d, h). 35.5 x 44.0 x 5.0 cm. [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (2). 18 V, 0 kHz, DiSEqC C (2). 13 V, 22 kHz, DiSEqC C (2). 18 V, 22 kHz, DiSEqC C (2). 13 V, 0 kHz, DiSEqC D (2). 18 V, 0 kHz, DiSEqC D (2). 13 V, 22 kHz, DiSEqC D (2). 18 V, 22 kHz, DiSEqC D (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. Terminate all unused outputs by 75 ohm loads, if terrestrial band is used. A suitable cascadable unit can be placed before to extend the number of available outputs. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS17/60EEU-13 (17inputs, 60outputs), Made in EU, 4yrs. WNTY” is in sale since Saturday, March 14, 2015. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

Number of Inputs: 17
Number of Outputs: 60
Brand: EMP – Centauri
Model: MS17/60EEU-13
MPN: MS17/60EEU-13
Country/Region of Manufacture: Czech Republic

Satellite multiswitch MS17/26PIU-6 (17inputs, 26outputs), Made in EU, 4yrs. WNTY

- admin
- November 1, 2015
- November 1st, 2015
- satellite
- 17inputs 26outputs 4yrs made ms1726piu-6 multiswitch satellite wnty

Individual prices for resellers. 17in/26out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 26 users With this multiswitch, you can receive all satellite TV signals from up to 4 different satellites simultaneously at 26 TV sets! For indoor use only. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). 13 V, 0 kHz, DiSEqC D (4). 18 V, 0 kHz, DiSEqC D (4). 13 V, 22 kHz, DiSEqC D (4). 18 V, 22 kHz, DiSEqC D (4). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS17/26PIU-6 (17inputs, 26outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, November 02, 2014. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

Number of Inputs: 17
Number of Outputs: 26
Brand: EMP – Centauri
Model: MS17/26PIU-6
MPN: MS17/26PIU-6
Country/Region of Manufacture: Czech Republic

April 2024
M	T	W	T	F	S	S
« Mar
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30