• Tag Archives: wnty

Satellite multiswitch MS13/40EEU-13 (13inputs, 40outputs), Made in EU, 4yrs. WNTY

Satellite-multiswitch-MS13-40EEU-13-13inputs-40outputs-Made-in-EU-4yrs-WNTY-01-pyj
Satellite multiswitch MS13/40EEU-13 (13inputs, 40outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch MS13/40EEU-13 (13inputs, 40outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch MS13/40EEU-13 (13inputs, 40outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch MS13/40EEU-13 (13inputs, 40outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 13in/40out standalone multiswitch for distribution of 12 SAT IF signals including terrestrial for up to 40 users With this multiswitch, you can receive all satellite TV signals from up to 3 different satellites simultaneously at 40 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2150 MHz (passive) 40-2150 MHz (active). DiSEqC 1.0 (2.0). 10 dB (950 MHz) – 0 dB (2150 MHz). 30 ± 4 dB. 5 ± 4 dB. 110 dBµV avg (passive) 85 dBµV avg (active). 80 dBµV avg (passive) 82 dBµV avg (active). 100 mA (18 V). From external power supply. 9 W (passive) 10 W (active) + LNB. 150 mA max (12 V DC). Dimensions (w, d, h). 35.5 x 35.0 x 5.0 cm. [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (2). 18 V, 0 kHz, DiSEqC C (2). 13 V, 22 kHz, DiSEqC C (2). 18 V, 22 kHz, DiSEqC C (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. Terminate all unused outputs by 75 ohm loads, if terrestrial band is used. A suitable cascadable unit can be placed before to extend the number of available outputs. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS13/40EEU-13 (13inputs, 40outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, August 18, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Model: MS13/40EEU-13
  • Modified Item: No
  • Country/Region of Manufacture: Czech Republic
  • Custom Bundle: Yes
  • Non-Domestic Product: No
  • Type: Wideband Multiswitch
  • Number of Outputs: 40
  • MPN: MS13/40EEU-13
  • Number of Inputs: 13
  • Brand: EMP – Centauri
  • Bundle Description: Multiswitch + Power Supply Unit

Satellite multiswitch MS13/40EEU-13 (13inputs, 40outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 9/16 (9×16) MS9/16ECU-12, Made in EU, 4yrs. WNTY

Satellite-multiswitch-9-16-9x16-MS9-16ECU-12-Made-in-EU-4yrs-WNTY-01-yba
Satellite multiswitch 9/16 (9x16) MS9/16ECU-12, Made in EU, 4yrs. WNTY
Satellite multiswitch 9/16 (9x16) MS9/16ECU-12, Made in EU, 4yrs. WNTY
Satellite multiswitch 9/16 (9x16) MS9/16ECU-12, Made in EU, 4yrs. WNTY

Satellite multiswitch 9/16 (9x16) MS9/16ECU-12, Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 9in/16out standalone satellite multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 16 users, including AC/DC power adapter PA12. To be used with 2 Quattro LNBs (for use with Quattro LNBs only). Using a rotary trimmer, it is possible to switch terrestrial band from active to passive mode. The external power supply is included in the package. Power from external supply is through socket DC 2.1 interconnected to all inputs. With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 16TV sets! For indoor use only. HDTV and UltraHDTV ready. DiSEqC 1.0 (2.0) commands. 80 mA (18 V). Dimensions (w, d, h). 18.6 x 24.5 x 5.1 cm. [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. Terminate all unused outputs by 75 ohm loads, if terrestrial band is used. A suitable cascadable unit can be placed before to extend the number of available outputs. The power AC/DC adapter PA12 is ideal for use with antenna devices like amplifiers, multiswitches, in communications, industrial automation etc. Protection: Shortage Protection, Overload Protection, Over Voltage Protection. Shell Material: Metal case / Aluminium base. 90-265 V AC, 50/60 Hz. 1,5 A max. 16 x 6.4 x 5 cm. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 9/16 (9×16) MS9/16ECU-12, Made in EU, 4yrs. WNTY” is in sale since Friday, June 7, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Model: MS9/16ECU-12
  • Modified Item: No
  • Country/Region of Manufacture: Czech Republic
  • Custom Bundle: Yes
  • Type: Wideband Multiswitch
  • Number of Outputs: 16
  • MPN: MS9/16ECU-12
  • Number of Inputs: 9
  • Brand: EMP – Centauri
  • Non-Domestic Product: No
  • Bundle Description: Satellite multiswitch and external power supply

Satellite multiswitch 9/16 (9x16) MS9/16ECU-12, Made in EU, 4yrs. WNTY

Satellite multiswitch 9/6 (9×10) MS9/6ECP-4, Made in EU, 4yrs. WNTY

Satellite-multiswitch-9-6-9x10-MS9-6ECP-4-Made-in-EU-4yrs-WNTY-01-lj
Satellite multiswitch 9/6 (9x10) MS9/6ECP-4, Made in EU, 4yrs. WNTY
Satellite multiswitch 9/6 (9x10) MS9/6ECP-4, Made in EU, 4yrs. WNTY
Satellite multiswitch 9/6 (9x10) MS9/6ECP-4, Made in EU, 4yrs. WNTY

Satellite multiswitch 9/6 (9x10) MS9/6ECP-4, Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 9in/6out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 6users, including power AC/DC adapter PA12. To be used with 4 Quattro LNBs. With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 6 TV sets. For indoor use only. HDTV and UltraHDTV ready. DiSEqC 1.0 (2.0) commands. 80 mA (18 V). Dimensions (w, d, h). 18.6 x 14.6 x 5.1 cm. [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. Terminate all unused outputs by 75 ohm loads, if terrestrial band is used. A suitable cascadable unit can be placed before to extend the number of available outputs. The AC/DC adapter PA12 is ideal for use with antenna devices like amplifiers, multiswitches, in communications, industrial automation etc. Protection: Shortage Protection, Overload Protection, Over Voltage Protection. Shell Material: Metal case / Aluminium base. 90-265 V AC, 50/60 Hz. 1,5 A max. 16 x 6.4 x 5 cm. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. We believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 9/6 (9×10) MS9/6ECP-4, Made in EU, 4yrs. WNTY” is in sale since Friday, April 19, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Model: MS9/6ECP-4
  • Modified Item: No
  • Country/Region of Manufacture: Czech Republic
  • Custom Bundle: Yes
  • Type: Wideband Multiswitch
  • Number of Outputs: 6
  • MPN: MS9/6ECP-4
  • Number of Inputs: 9
  • Brand: EMP – Centauri
  • Bundle Description: Multiswitch and Power Supply Unit

Satellite multiswitch 9/6 (9x10) MS9/6ECP-4, Made in EU, 4yrs. WNTY

Satellite Multiswitch 9/8 (9×8) (9inputs, 8outputs), Made in EU, 4yrs. WNTY

Satellite-Multiswitch-9-8-9x8-9inputs-8outputs-Made-in-EU-4yrs-WNTY-01-nlq
Satellite Multiswitch 9/8 (9x8) (9inputs, 8outputs), Made in EU, 4yrs. WNTY
Satellite Multiswitch 9/8 (9x8) (9inputs, 8outputs), Made in EU, 4yrs. WNTY

Satellite Multiswitch 9/8 (9x8) (9inputs, 8outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 9in/8out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 8 users With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 8TV sets. For indoor use only. HDTV and UltraHDTV ready. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). DiSEqC 1.0 (2.0) commands. 100 dBµV avg (passive) 90 dBµV avg (active). 82 dBµV avg (passive) 89 dBµV avg (active). 50 mA (18 V). From internal power supply. 3 W (passive) 4.5 W (active) + LNB. 150 mA max (12 V DC). Dimensions (w, d, h). 34.7 x 15.2 x 8.7 cm (power cord length 130 cm). Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite Multiswitch 9/8 (9×8) (9inputs, 8outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Number of Outputs: 8
  • Model: MS9/8PIU-5
  • Modified Item: No
  • MPN: MS9/8PIU-5
  • Country/Region of Manufacture: Czech Republic
  • Custom Bundle: No
  • Number of Inputs: 9
  • Brand: EMP – Centauri
  • Type: Wideband Multiswitch

Satellite Multiswitch 9/8 (9x8) (9inputs, 8outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 9/16 (9×16) (9inputs, 16outputs), Made in EU, 4yrs. WNTY

Satellite-multiswitch-9-16-9x16-9inputs-16outputs-Made-in-EU-4yrs-WNTY-01-dn
Satellite multiswitch 9/16 (9x16) (9inputs, 16outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch 9/16 (9x16) (9inputs, 16outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 9/16 (9x16) (9inputs, 16outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 9in/16out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 16 users With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 16 TV sets!! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0 or 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 82 dBµV avg (active). 50 mA (18 V). From internal power supply. 3 W (passive) 4.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 9/16 (9×16) (9inputs, 16outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Number of Outputs: 16
  • Model: MS9/16PIU-6
  • Modified Item: No
  • MPN: MS9/16PIU-6
  • Country/Region of Manufacture: Czech Republic
  • Custom Bundle: No
  • Number of Inputs: 9
  • Brand: EMP – Centauri
  • Type: Wideband Multiswitch

Satellite multiswitch 9/16 (9x16) (9inputs, 16outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 13/12 (13×12) (13inputs, 12outputs), Made in EU, 4yrs. WNTY

Satellite-multiswitch-13-12-13x12-13inputs-12outputs-Made-in-EU-4yrs-WNTY-01-tlly
Satellite multiswitch 13/12 (13x12) (13inputs, 12outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch 13/12 (13x12) (13inputs, 12outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 13/12 (13x12) (13inputs, 12outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 13in/12out standalone multiswitch for distribution of 12 SAT IF signals including terrestrial for up to 12 users With this multiswitch, you can receive all satellite TV signals from up to 3 different satellites simultaneously at 12 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 13/12 (13×12) (13inputs, 12outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Number of Outputs: 12
  • Model: MS13/12PIU-6
  • Modified Item: No
  • MPN: MS13/12PIU-6
  • Country/Region of Manufacture: Czech Republic
  • Custom Bundle: No
  • Number of Inputs: 13
  • Brand: EMP – Centauri
  • Type: Wideband Multiswitch

Satellite multiswitch 13/12 (13x12) (13inputs, 12outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 13/16 (13×16) (13inputs, 16outputs), Made in EU, 4yrs. WNTY

Satellite-multiswitch-13-16-13x16-13inputs-16outputs-Made-in-EU-4yrs-WNTY-01-uuc
Satellite multiswitch 13/16 (13x16) (13inputs, 16outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch 13/16 (13x16) (13inputs, 16outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 13/16 (13x16) (13inputs, 16outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 13in/16out standalone multiswitch for distribution of 12 SAT IF signals including terrestrial for up to 16 users With this multiswitch, you can receive all satellite TV signals from up to 3 different satellites simultaneously at 16 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 13/16 (13×16) (13inputs, 16outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Number of Outputs: 16
  • Model: MS13/16PIU-6
  • Modified Item: No
  • MPN: MS13/16PIU-6
  • Country/Region of Manufacture: Czech Republic
  • Custom Bundle: No
  • Number of Inputs: 13
  • Brand: EMP – Centauri
  • Type: Wideband Multiswitch

Satellite multiswitch 13/16 (13x16) (13inputs, 16outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 17/16 (17×16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY

Satellite-multiswitch-17-16-17x16-17inputs-16outputs-Made-in-EU-4yrs-WNTY-01-ozmd
Satellite multiswitch 17/16 (17x16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch 17/16 (17x16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 17/16 (17x16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 17in/16out standalone multiswitch for distribution of 16 SAT IF signals including terrestrial for up to 16 users With this multiswitch, you can receive all satellite TV signals from up to 4 different satellites simultaneously at 16 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). 13 V, 0 kHz, DiSEqC D (4). 18 V, 0 kHz, DiSEqC D (4). 13 V, 22 kHz, DiSEqC D (4). 18 V, 22 kHz, DiSEqC D (4). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 17/16 (17×16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Model: MS17/16PIU-6
  • Modified Item: No
  • Country/Region of Manufacture: Czech Republic
  • Custom Bundle: No
  • Type: Wideband Multiswitch
  • Number of Outputs: 16
  • MPN: MS17/16PIU-6
  • Number of Inputs: 17
  • Brand: EMP – Centauri

Satellite multiswitch 17/16 (17x16) (17inputs, 16outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 13/26 (13×26) (13inputs, 26outputs), Made in EU, 4yrs. WNTY

Satellite-multiswitch-13-26-13x26-13inputs-26outputs-Made-in-EU-4yrs-WNTY-01-zeid
Satellite multiswitch 13/26 (13x26) (13inputs, 26outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch 13/26 (13x26) (13inputs, 26outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 13/26 (13x26) (13inputs, 26outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 13in/26out standalone multiswitch for distribution of 12 SAT IF signals including terrestrial for up to 26 users With this multiswitch, you can receive all satellite TV signals from up to 3 different satellites simultaneously at 26 TV sets! For indoor use only. HDTV and UHDTV compatible. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0, 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 80 dBµV avg (active). 75 mA (18 V). From internal power supply. 4.5 W (passive) 6.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). 13 V, 0 kHz, DiSEqC C (3). 18 V, 0 kHz, DiSEqC C (3). 13 V, 22 kHz, DiSEqC C (3). 18 V, 22 kHz, DiSEqC C (3). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. Terms of Sale Guarantees We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 13/26 (13×26) (13inputs, 26outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, April 14, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Number of Outputs: 26
  • Model: MS13/26PIU-6
  • Modified Item: No
  • MPN: MS13/26PIU-6
  • Country/Region of Manufacture: Czech Republic
  • Custom Bundle: No
  • Number of Inputs: 13
  • Brand: EMP – Centauri
  • Type: Wideband Multiswitch

Satellite multiswitch 13/26 (13x26) (13inputs, 26outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch 9/20 (9×20) MS9/20ECP-12, Made in EU, 4yrs. WNTY

Satellite multiswitch 9/20 (9x20) MS9/20ECP-12, Made in EU, 4yrs. WNTY
Satellite multiswitch 9/20 (9x20) MS9/20ECP-12, Made in EU, 4yrs. WNTY
Satellite multiswitch 9/20 (9x20) MS9/20ECP-12, Made in EU, 4yrs. WNTY

Satellite multiswitch 9/20 (9x20) MS9/20ECP-12, Made in EU, 4yrs. WNTY
Individual prices for resellers. Made in the EU. 9in/20out standalone satellite multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 20 users, including AC/DC power adapter PA12. To be used with 2 Quattro LNBs. With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 20 TV sets! For indoor use only. HDTV and UltraHDTV ready. DiSEqC 1.0 (2.0) commands. 80 mA (18 V). Dimensions (w, d, h). 18.6 x 24.5 x 5.1 cm. [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. Terminate all unused outputs by 75 ohm loads, if terrestrial band is used. A suitable cascadable unit can be placed before to extend the number of available outputs. The power AC/DC adapter PA12 is ideal for use with antenna devices like amplifiers, multiswitches, in communications, industrial automation etc. Protection: Shortage Protection, Overload Protection, Over Voltage Protection. Shell Material: Metal case / Aluminium base. 90-265 V AC, 50/60 Hz. 1,5 A max. 16 x 6.4 x 5 cm. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. The item “Satellite multiswitch 9/20 (9×20) MS9/20ECP-12, Made in EU, 4yrs. WNTY” is in sale since Saturday, December 15, 2018. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Number of Inputs: 9
  • Number of Outputs: 20
  • Brand: EMP – Centauri
  • Model: MS9/20ECP-12
  • MPN: MS9/20ECP-12
  • Country/Region of Manufacture: Czech Republic
  • Modified Item: No
  • Non-Domestic Product: No
  • Custom Bundle: Yes
  • Type: Wideband Multiswitch
  • Bundle Description: Satellite multiswitch and external power supply

Satellite multiswitch 9/20 (9x20) MS9/20ECP-12, Made in EU, 4yrs. WNTY
close