• Category Archives: geosatpro

Lot of 2 GEOSATpro 4×1 DiSEqC FTA Satellite Multi Switch GDSW41 Free To Air

Lot-of-2-GEOSATpro-4x1-DiSEqC-FTA-Satellite-Multi-Switch-GDSW41-Free-To-Air-01-mvxy
Lot of 2 GEOSATpro 4x1 DiSEqC FTA Satellite Multi Switch GDSW41 Free To Air
Lot of 2 GEOSATpro 4x1 DiSEqC FTA Satellite Multi Switch GDSW41 Free To Air
Lot of 2 GEOSATpro 4x1 DiSEqC FTA Satellite Multi Switch GDSW41 Free To Air
Lot of 2 GEOSATpro 4x1 DiSEqC FTA Satellite Multi Switch GDSW41 Free To Air

Lot of 2 GEOSATpro 4x1 DiSEqC FTA Satellite Multi Switch GDSW41 Free To Air
LOT OF 2 PCS BRAND NEW GEOSATpro 4×1 DiSEqC 2.0 FTA Switch! This GEOSATpro DiSEqC Switch is 4-way DiSEqC 2.0 Switch that allows for simultaneous connections for up to 4 satellites to be hooked up and linked into one receiver. This DiSEqC switch is compatible with all Free To Air FTA Receivers. DiSEqC 2.0 is backward compatible with DiSEqC 1.1 and 1.0 also, so works with any DiSEqC receiver. This is a must have for FTA’ers Allows you to connect up to 4 LNB’s or 4 single LNB dishes aimed at 4 different satellites Switches between these satellite feeds automatically when you change the channel. Tip – Power down + unplug your receiver before installing any switch. Otherwise you may damage it. Thanks for looking and good luck on your auctions! The item “Lot of 2 GEOSATpro 4×1 DiSEqC FTA Satellite Multi Switch GDSW41 Free To Air” is in sale since Thursday, March 3, 2016. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “hypermegasat” and is located in Davison, Michigan. This item can be shipped worldwide.
  • Type: DiSeqC
  • Number of Outputs: 1
  • MPN: GDSW41
  • Number of Inputs: 4
  • Brand: GEOSATpro

Lot of 2 GEOSATpro 4x1 DiSEqC FTA Satellite Multi Switch GDSW41 Free To Air

GEOSATpro 22KHz Tone Controlled Satellite Switch 2×1 Multi-Switch SW21 SW-21 FTA

GEOSATpro-22KHz-Tone-Controlled-Satellite-Switch-2x1-Multi-Switch-SW21-SW-21-FTA-01-euzb
GEOSATpro 22KHz Tone Controlled Satellite Switch 2x1 Multi-Switch SW21 SW-21 FTA
GEOSATpro 22KHz Tone Controlled Satellite Switch 2x1 Multi-Switch SW21 SW-21 FTA

GEOSATpro 22KHz Tone Controlled Satellite Switch 2x1 Multi-Switch SW21 SW-21 FTA
GEOSATpro 2X1 22KHz Tone Controlled Switch. Compatible with GEOSATpro, Viewsat, Coolsat, Sonicview, Pansat, Fortec, CaptiveWorks, Dreambox, Amiko, Traxis, Neosat, Nfusion, Lexium, Linkbox, Openbox, AzBox, Manhattan, etc. Works with any FTA Receiver that is 22KHz Compatible. Allows you to connect up to 2 LNB’s or 2 single LNB dishes aimed at 2 different satellites. Switches between these satellite automatically when you change the channel. We guarantee the switch to work as intended when you receive it. Please look at our other auctions for great deals. The item “GEOSATpro 22KHz Tone Controlled Satellite Switch 2×1 Multi-Switch SW21 SW-21 FTA” is in sale since Friday, September 6, 2019. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “shopwithmomandpop” and is located in Portland, Oregon. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Dominica, Saint kitts and nevis, Turks and caicos islands, Brunei darussalam, Ecuador, Cayman islands, Maldives, Nicaragua, Peru, Viet nam, Uruguay.
  • Model: 22KHz Controlled Switch
  • Number of Outputs: 2
  • MPN: SW21
  • Number of Inputs: 1
  • Brand: GeoSatPro

GEOSATpro 22KHz Tone Controlled Satellite Switch 2x1 Multi-Switch SW21 SW-21 FTA

GEOSATpro 2×4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish

GEOSATpro-2x4-Multi-Switch-for-FTA-Satellite-Connect-4-receivers-to-1-Dish-01-yvu
GEOSATpro 2x4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish
GEOSATpro 2x4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish
GEOSATpro 2x4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish

GEOSATpro 2x4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish
ONE BRAND NEW GEOSATpro 2×4 Multi-Switch for FTA Satellite! Perfect for connecting 2, 3, or 4 satellite receivers to receive a single satellite. Made by ECODA for GEOSATpro, these will switch reliably for years! Supports up to 4 satellite receivers when used with a standard two output LNBF like the GEOSATpro SL2. The switch does not require a power supply and operates from the power supplied by the satellite receiver. Compatible with DBS, DSS and DVBS FTA HD systems. Indoor / Outdoor Use. Compatible with STANDARD DUAL output LNB satellite dish systems. Output for up to 4 satellite receivers. A STANDARD DUAL Output LNBF is required for use with this 2×4 Multi-Switch. See install diagram pictured for how to connect. Tip – Power down and unplug your receiver before installing any switch. Otherwise you may damage it. The item “GEOSATpro 2×4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish” is in sale since Saturday, March 17, 2018. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\TV & Video Accessories\Satellite Signal Multiswitches”. The seller is “hypermegasat” and is located in Davison, Michigan. This item can be shipped worldwide.
  • Number of Outputs: 4
  • MPN: G2X4MS
  • Number of Inputs: 2
  • Brand: GEOSATpro

GEOSATpro 2x4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish

GEOSATpro 2×4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish

GEOSATpro 2x4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish
GEOSATpro 2x4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish

GEOSATpro 2x4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish
ONE BRAND NEW GEOSATpro 2×4 Multi-Switch for FTA Satellite! Perfect for connecting 2, 3, or 4 satellite receivers to receive a single satellite. Made by ECODA for GEOSATpro, these will switch reliably for years! Supports up to 4 satellite receivers when used with a standard two output LNBF like the GEOSATpro SL2. The switch does not require a power supply and operates from the power supplied by the satellite receiver. Compatible with DBS, DSS and DVBS FTA HD systems. Indoor / Outdoor Use. Compatible with STANDARD DUAL output LNB satellite dish systems. Output for up to 4 satellite receivers. A STANDARD DUAL Output LNBF is required for use with this 2×4 Multi-Switch. See install diagram pictured for how to connect. Tip – Power down and unplug your receiver before installing any switch. Otherwise you may damage it. The item “GEOSATpro 2×4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish” is in sale since Friday, April 07, 2017. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “hypermegasat” and is located in Davison, Michigan. This item can be shipped worldwide.
  • Number of Inputs: 2
  • Number of Outputs: 4
  • Brand: GEOSATpro
  • MPN: G2X4MS

GEOSATpro 2x4 Multi-Switch for FTA Satellite, Connect 4 receivers to 1 Dish
close