• Tag Archives: satellite

Satellite multiswitch MS9/10PIU-5 (9inputs, 10outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch MS9/10PIU-5 (9inputs, 10outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch MS9/10PIU-5 (9inputs, 10outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch MS9/10PIU-5 (9inputs, 10outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. 9in/10out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 10 users With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 10 TV sets. For indoor use only. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). DiSEqC 1.0 (2.0) commands. 100 dBµV avg (passive) 90 dBµV avg (active). 82 dBµV avg (passive) 89 dBµV avg (active). 50 mA (18 V). From internal power supply. 3 W (passive) 4.5 W (active) + LNB. 150 mA max (12 V DC). Dimensions (w, d, h). 34.7 x 15.2 x 8.7 cm (power cord length 130 cm). Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS9/10PIU-5 (9inputs, 10outputs), Made in EU, 4yrs. WNTY” is in sale since Saturday, March 14, 2015. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Number of Inputs: 9
  • Number of Outputs: 10
  • Brand: EMP – Centauri
  • Model: MS9/10PIU-5
  • MPN: MS9/10PIU-5
  • Country/Region of Manufacture: Czech Republic

Satellite multiswitch MS9/10PIU-5 (9inputs, 10outputs), Made in EU, 4yrs. WNTY

FTA 8×1 DiSEqC Switch 8 in 1 Satellite LNB Receiver MultiSwitch LNBF Dish

FTA 8x1 DiSEqC Switch 8 in 1 Satellite LNB Receiver MultiSwitch LNBF Dish
FTA 8x1 DiSEqC Switch 8 in 1 Satellite LNB Receiver MultiSwitch LNBF Dish
FTA 8x1 DiSEqC Switch 8 in 1 Satellite LNB Receiver MultiSwitch LNBF Dish
FTA 8x1 DiSEqC Switch 8 in 1 Satellite LNB Receiver MultiSwitch LNBF Dish

FTA 8x1 DiSEqC Switch 8 in 1 Satellite LNB Receiver MultiSwitch LNBF Dish
Brand New 8×1 DiSEqC Switch. DiSEqC switches is one of the greatest things that’s happened to satellite. But sometimes there is a need to connect more than 2 dishes or 4 dishes. Now you can connect up to 8 dishes or LNBFs on one device. So, for you guys that have real dish farms, this is for you. Use this switch to connect up to 8 LNBFs. If that isn’t enough for you, use two 8×1 DiSEqC switches and one of our 22KHz switches to switch between the two 8×1 DiSEqC switches. Now you’ve got up to 16 LNBFs connected to one receiver. Isolation: 30dB Insertion Loss: 3dB. Very important to do this. Efore you connect or disconnect the switch, make sure the Receiver. Is completely disconnected from any electricity outlets and has no electric connection. Even if the button is off on the Receiver. You still need to unplug it. Otherwise it will burn the switch (switch will no longer be useful). You will receive 1 (one) Brand New. The same as showing on picture. It is comes with retail package. In case you do not receive your items within the time allocated i. Takes 3 to 6 weeks. Depending on the country. Once we send the item usually we have no control over the item. Please dont leave any negative or neutral feedback because of that. These charges are the buyers responsibility. 3 up to 6 weeks. We are not responsible for carrier transit time. We sell these items with reasonable price, because we need your 100% support. And review of our reputation. Thanks for shopping with us! The item “FTA 8×1 DiSEqC Switch 8 in 1 Satellite LNB Receiver MultiSwitch LNBF Dish” is in sale since Wednesday, February 29, 2012. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “paxlycom” and is located in Orange, California. This item can be shipped worldwide.
FTA 8x1 DiSEqC Switch 8 in 1 Satellite LNB Receiver MultiSwitch LNBF Dish

FTA Switch 2×1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch

FTA Switch 2x1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch
FTA Switch 2x1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch
FTA Switch 2x1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch
FTA Switch 2x1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch
FTA Switch 2x1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch
FTA Switch 2x1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch

FTA Switch 2x1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch
Brand New 2X1 DiSEqC FTA Switch. Input Return Loss: 7.5dB. Output Return Loss:7.5dB. Very important to do this. Efore you connect or disconnect the switch, make sure the Receiver. Is completely disconnected from any electricity outlets and has no electric connection. Even if the button is off on the Receiver. You still need to unplug it. Otherwise it will burn the switch (switch will no longer be useful). You will receive 1 (one) Brand New. The same as showing on picture. Installer welcome Wholesale Available. In case you do not receive your items within the time allocated i. Takes 3 to 6 weeks. Depending on the country. Once we send the item usually we have no control over the item. Please dont leave any negative or neutral feedback because of that. These charges are the buyers responsibility. 3 up to 6 weeks. We are not responsible for carrier transit time. We sell these items with reasonable price, because we need your 100% support. And review of our reputation. Thanks for shopping with us! The item “FTA Switch 2×1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch” is in sale since Wednesday, November 30, 2011. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “paxlycom” and is located in Orange, California. This item can be shipped worldwide.
  • Number of Inputs: 1
  • Number of Outputs: 2
  • Model: GD-211

FTA Switch 2x1 DiSEqC LNB Satellite Multi Dish LNBF Receiver Multiswitch

NEW SW44 BELL EXPRESS VU Dish Network MULTI SWITCH HDTV SATELLITE SW 44 4X4 HD

NEW SW44 BELL EXPRESS VU Dish Network MULTI SWITCH HDTV SATELLITE SW 44 4X4 HD
NEW SW44 BELL EXPRESS VU Dish Network MULTI SWITCH HDTV SATELLITE SW 44 4X4 HD
NEW SW44 BELL EXPRESS VU Dish Network MULTI SWITCH HDTV SATELLITE SW 44 4X4 HD
NEW SW44 BELL EXPRESS VU Dish Network MULTI SWITCH HDTV SATELLITE SW 44 4X4 HD
NEW SW44 BELL EXPRESS VU Dish Network MULTI SWITCH HDTV SATELLITE SW 44 4X4 HD

NEW SW44 BELL EXPRESS VU Dish Network MULTI SWITCH HDTV SATELLITE SW 44 4X4 HD
CONVERTS TWO DUAL LNBS TO SUPPORT 4 RECEIVERS. WORKS WITH FTA RECEIVER. GUARANTEED TO WORK %100. The SW44 switch is used to FEED up to four receivers from two legacy dual LNBFs. Same switch used by bell express vu and dish network. Complete SW44 Switch includes: SW44 Switch Power Inserter Power Supply POWER CABLE INSTRUCTIONS BOOKLET. CONVERTING TWO DUAL LNBS TO SUPPORT UP TO FOUR RECEIVER. CONVERTING TWO DUAL LNBS TO HOOK UP TO 8 RECEIVER: YOU WILL ALSO NEED 3X4 SWITCHES AND TWO SW44. CHECK OUT MY other items. The item “NEW SW44 BELL EXPRESS VU Dish Network MULTI SWITCH HDTV SATELLITE SW 44 4X4 HD” is in sale since Thursday, January 19, 2012. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “electorica” and is located in FAST SHIPPING. This item can be shipped worldwide.
  • Number of Inputs: 4
  • Number of Outputs: 4
  • Brand: ORIGINAL BELL / DISH NETWORK
  • Model: SW44
  • Country of Manufacture: United States
  • Accessory Type: Multiswitches
  • Satellite TV Provider: DISH NETWORK/ BELL EXPRESS VU
  • MPN: SW44
  • UPC: Does not apply

NEW SW44 BELL EXPRESS VU Dish Network MULTI SWITCH HDTV SATELLITE SW 44 4X4 HD

Satellite multiswitch MS9/8EIP-9 (9inputs, 8outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch MS9/8EIP-9 (9inputs, 8outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch MS9/8EIP-9 (9inputs, 8outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch MS9/8EIP-9 (9inputs, 8outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. 9in/8out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 8 users With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 8 TV sets. It is compatible with Quattro as well as with Quad LNBs. For indoor use only. DiSEqC 1.0 (2.0) commands. 40 mA (18 V). From internal power supply. 6 W + LNB. Dimensions (w, d, h). 36.0 x 11.4 x 5.3 (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. We believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS9/8EIP-9 (9inputs, 8outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, February 08, 2015. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Number of Inputs: 9
  • Number of Outputs: 8
  • Brand: EMP – Centauri
  • Model: MS9/8EIP-9
  • MPN: MS9/8EIP-9
  • Country/Region of Manufacture: Czech Republic

Satellite multiswitch MS9/8EIP-9 (9inputs, 8outputs), Made in EU, 4yrs. WNTY

LOT OF 10 FTA DISEQC SATELLITE TV SWITCH DISH LNB MULTI

LOT OF 10 FTA DISEQC SATELLITE TV SWITCH DISH LNB MULTI

LOT OF 10 FTA DISEQC SATELLITE TV SWITCH DISH LNB MULTI
Please click a photo on the left to view full size. HIGH QUALITY FTA DISEQC SWITCH The #1 DISEQC used and trusted by most professional installers. Compatible with all FTA Receiver, e. Viewsat, Pansat, Sonicview, CNX, CW, Coolsat, Fortec Star, Dreambox, and many more.. Compatible with all DiSEqC protocols, i. 1.0, 1.2, 1.3, 1.6, 2.0… Allow you to connect 4 lines of satellite signals to your receiver. Allow remote units to report their possible and actual configuration. 4 Satellite inputs selected by DiSEqC commands. Support DiSEqC standby commands. 1 output for receiver with DiSEqC commands function. Backwards compatibility with Tone Burst. Note: make sure to power off your receiver before connecting the switch to prevent static damage to your equipments. IF ANYTHING COMES UP, WE WILL TAKE CARE OF IT RIGHT AWAY! The item “LOT OF 10 FTA DISEQC SATELLITE TV SWITCH DISH LNB MULTI” is in sale since Monday, December 28, 2009. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “portportal” and is located in ITEMS SHIPPED SAME OR NEXT DAY GUARANTEED. This item can be shipped to United States, to Canada.
  • UPC: 0886729185378

LOT OF 10 FTA DISEQC SATELLITE TV SWITCH DISH LNB MULTI

FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF

FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF
FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF
FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF
FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF
FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF
FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF
FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF
FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF

FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF
FTA 4×1 DiSEqC2.0. The DMS International is the newest addition to the DMS International line of multi switches and DiSEqC switches. It is allows the user to connect up to 4 satellite sources (LNBF) and combine the signal into a single coaxial cable and connect them to a single satellite receiver. Unlike the competitors model, this one will provide you years and after years of non-interrupted work. It is Works with any satellite receiver with DiSEqC version 1.0 or higher. NOTE (important): Always power down your receiver before connecting or dis-connecting DiSEqC switches to avoid damaging your switch. Connectors F type Female. You will receive 1 (one) Brand New. The same as showing on picture. In case you do not receive your items within the time allocated i. Takes 3 to 6 weeks. Depending on the country. Once we send the item usually we have no control over the item. Please dont leave any negative or neutral feedback because of that. These charges are the buyers responsibility. We are not responsible for carrier transit time. We sell these items with reasonable price, because we need your 100% support. And review of our reputation. Thanks for shopping with us! The item “FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF” is in sale since Wednesday, November 06, 2013. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “paxlycom” and is located in Orange, California. This item can be shipped worldwide.
  • Number of Inputs: 4
  • Number of Outputs: 1
  • Brand: DMS International
  • Model: 4×1 DiSEqC Switch

FTA Switch 4X1 DiSEqC Satellite Dish for FTA Receiver 4 in 1 Multi LNB LNBF

Hills 2×4 Satellite FTA Pay TV Multi switch 2 input 4 output Approved by Foxtel

Hills 2x4 Satellite FTA Pay TV Multi switch 2 input 4 output Approved by Foxtel

Hills 2x4 Satellite FTA Pay TV Multi switch 2 input 4 output Approved by Foxtel
Compact and light weight Earth point attachment Output ports one sided Digital and analogue compatible Power through to LNB Easy to install European design. A two input, four output standalone multiswitch for distribution of satellite TV signals. Approved by Foxtel and Austar. Receive signals from 2 Different Satellite (LNBs) TV Antenna, then connecting up to 4 Receivers or 2 Mystar/IQ Foxtel Receivers. The item “Hills 2×4 Satellite FTA Pay TV Multi switch 2 input 4 output Approved by Foxtel” is in sale since Monday, November 04, 2013. This item is in the category “Home Entertainment\Television Accessories\Splitters & Combiners”. The seller is “madelectronicsaus” and is located in Windang, New South Wales. This item can be shipped worldwide.
  • Brand: Foxtel

Hills 2x4 Satellite FTA Pay TV Multi switch 2 input 4 output Approved by Foxtel

10 X HEAVY DUTY WSD-2041 CHIETA DISEqC MULTI-SWITCH 4X1 SATELLITE FTA LNB

10 X HEAVY DUTY WSD-2041 CHIETA DISEqC MULTI-SWITCH 4X1 SATELLITE FTA LNB
10 X HEAVY DUTY WSD-2041 CHIETA DISEqC MULTI-SWITCH 4X1 SATELLITE FTA LNB
10 X HEAVY DUTY WSD-2041 CHIETA DISEqC MULTI-SWITCH 4X1 SATELLITE FTA LNB
10 X HEAVY DUTY WSD-2041 CHIETA DISEqC MULTI-SWITCH 4X1 SATELLITE FTA LNB

10 X HEAVY DUTY WSD-2041 CHIETA DISEqC MULTI-SWITCH 4X1 SATELLITE FTA LNB
10 X HEAVY DUTY CHIETA DISEqC SATELLITE 4X1 SWITCH. BEST DISEqC 4X1 SWITCH EVER BUILT. WORKS WITH ALL FTA RECEIVER. YOU WILL RECEIVE 10 SWITCHES. Insertion Loss:1.5dB. Passing Current:500mA Max. Power Supply:12-20V DC/25mA. Control Signal: Position + Option. Dimension: 75 x 68 x 18mm. CHECK OUT MY other items. WE DO NOT OFFER ANY TYPE OF INSTALLATION OR PROGRAMMING INSTRUCTIONS OF ANY KIND PROFESSIONAL INSTALLATION OR PROGRAMMING RECOMMENDED. The item “10 X HEAVY DUTY WSD-2041 CHIETA DISEqC MULTI-SWITCH 4X1 SATELLITE FTA LNB” is in sale since Sunday, April 27, 2014. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “electorica” and is located in ROCHESTER, NY. This item can be shipped worldwide.
  • Number of Inputs: 4
  • Number of Outputs: 1
  • Brand: Chieta
  • Model: WSD-2041
  • MPN: WSD-2041
  • UPC: Does not apply

10 X HEAVY DUTY WSD-2041 CHIETA DISEqC MULTI-SWITCH 4X1 SATELLITE FTA LNB

Satellite multiswitch MS7/24EIA-6 (7inputs, 24outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch MS7/24EIA-6 (7inputs, 24outputs), Made in EU, 4yrs. WNTY
Satellite multiswitch MS7/24EIA-6 (7inputs, 24outputs), Made in EU, 4yrs. WNTY

Satellite multiswitch MS7/24EIA-6 (7inputs, 24outputs), Made in EU, 4yrs. WNTY
Individual prices for resellers. 7in/24out standalone multiswitch for distribution of 4 SAT IF signals including terrestrial for up to 24 users With this multiswitch, you can receive all satellite TV signals from 1 satellite position simultaneously at 24 TV sets!! It is designed for distribution of 4 SAT IF signals including active terrestrial for up to 24 users. Due to the built-in frequency diplexer for FM, DAB and UHF bands, it is possible to connect all necessary antennas directly to the multiswitch. For possible use of UHF masthead amplifier, 12V DC voltage is supplied on UHF input. An over-current protection circuity switches this power off when a DC short is detected on the UHF input. For the optimal level balancing the multiswitch offers three groups of outputs with insertion loss 0 or 5 or 10 dB, each group including 8 outputs. For indoor use only. FM 88-108 MHz DAB 216-240 MHz UHF 470-862 MHz. 13/18 V + 0/22 kHz. 80 dBµV (outputs 1-8) 85 dBµV (outputs 9-16) 90 dBµV (outputs 17-24). 85 dBµV (outputs1-8) 90 dBµV (outputs 9-16) 95 dBµV (outputs 17-24). 45 mA (18 V). From internal power supply. 9 W + LNB. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS7/24EIA-6 (7inputs, 24outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, February 22, 2015. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.
  • Number of Inputs: 7
  • Number of Outputs: 24
  • Brand: EMP – Centauri
  • Model: MS7/24EIA-6
  • MPN: MS7/24EIA-6
  • Country/Region of Manufacture: Czech Republic

Satellite multiswitch MS7/24EIA-6 (7inputs, 24outputs), Made in EU, 4yrs. WNTY
close