Individual prices for resellers. 9in/26out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 26 users With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 26 TV sets!! For indoor use only. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). 13/18 V + 0/22 kHz, DiSEqC 1.0 or 2.0. 100 dBµV avg (passive) 90 dBµV avg (active). 75 dBµV avg (passive) 82 dBµV avg (active). 50 mA (18 V). From internal power supply. 3 W (passive) 4.5 W (active) + LNB. 150 mA max at 12V DC. Dimensions (w, d, h). 47.0 x 15.2 x 8.7 cm (power cord length 130 cm). [dBµV]; SAT: EN 50083-3/35dB IMA. Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS9/26PIU-6 (9inputs, 26outputs), Made in EU, 4yrs. WNTY” is in sale since Sunday, November 02, 2014. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

• Number of Inputs: 9
• Number of Outputs: 26
• Brand: EMP – Centauri
• Model: MS9/26PIU-6
• MPN: MS9/26PIU-6
• Country/Region of Manufacture: Czech Republic

Individual prices for resellers. 9in/10out standalone multiswitch for distribution of 8 SAT IF signals including terrestrial for up to 10 users With this multiswitch, you can receive all satellite TV signals from 2 different satellites simultaneously at 10 TV sets. For indoor use only. 5-862 MHz (passive) 40-862 MHz (active). 5-2300 MHz (passive) 40-2300 MHz (active). DiSEqC 1.0 (2.0) commands. 100 dBµV avg (passive) 90 dBµV avg (active). 82 dBµV avg (passive) 89 dBµV avg (active). 50 mA (18 V). From internal power supply. 3 W (passive) 4.5 W (active) + LNB. 150 mA max (12 V DC). Dimensions (w, d, h). 34.7 x 15.2 x 8.7 cm (power cord length 130 cm). Multiswitches are controlled by receiver using analog and DiSEqC 1.0 commands. Command sent by receiver. Selected input of multiswitch. 13 V, 0 kHz, DiSEqC A (1). 18 V, 0 kHz, DiSEqC A (1). 13 V, 22 kHz, DiSEqC A (1). 18 V, 22 kHz, DiSEqC A (1). 13 V, 0 kHz, DiSEqC B (2). 18 V, 0 kHz, DiSEqC B (2). 13 V, 22 kHz, DiSEqC B (2). 18 V, 22 kHz, DiSEqC B (2). Multiswitches are not compatible with Monoblock LNBs. If higher than available number of user outputs is required, simply use two multiswitches instead of one, routing LNB outputs via signal splitters. If terrestrial band is used, terminate all unused outputs by 75 ohm loads. Switching between active and passive processing of terrestrial band is performed by lever No. 1 of configuration DIP-switch. 22 kHz tone required for Quad LNB can be disabled by DIP-switch. DC supply for preamplifier of terr. Antenna is limited to 150 mA max. The supply is disconnected if higher load or short circuit is applied to terrestrial input. To keep power consumption at minimum level is however recommended to include external DC block if short-circuit conditions should persist on terrestrial input. We represent that the goods are as they are described in the above listing. We must be advised of any faulty goods within 30 days of receipt. W e believe the information on this page to be accurate; such information is subject to change without notice. We are not responsible for any inadvertent errors. We pride ourselves on our customer service. We are here to assist you between 07:00 to 17:00 weekdays. +420 376 323 853, +420 376 323 813 (during workhours). The item “Satellite multiswitch MS9/10PIU-5 (9inputs, 10outputs), Made in EU, 4yrs. WNTY” is in sale since Saturday, March 14, 2015. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Accessories\Satellite Signal Multiswitches”. The seller is “sattvnoone” and is located in Klatovy, default. This item can be shipped worldwide.

• Number of Inputs: 9
• Number of Outputs: 10
• Brand: EMP – Centauri
• Model: MS9/10PIU-5
• MPN: MS9/10PIU-5
• Country/Region of Manufacture: Czech Republic