INVERTO 4 Way Sky Q Multiswitch. C/w Switchable Terrestrial Gain -5/+12dB The Multiswitch unit connects to a Quattro LNB and offers a Terrestrial input port to connect a terrestrial antenna for reception of UHF/DAB/radio broadcasts. The terrestrial signal can be amplifed through a dedicated ON/OFF switch and is combined over each of the 4 output ports. The Multiswitch unit can be powered through a DC input port, any of the trunk output lines or from the STB output ports (typically using a Sky power inserter device). In typical cascaded MDU installations, the DC voltage supplied over the DC in or trunk output lines is passed through to the trunk input lines in order to power the LNB and the STB DC pass to LNB trunk switch must be set to OFF. To help the installer ensure at the time of installation that the units power supply is sufficient to support a full load in the future i. 4x SkyQ STBs, the Multiswitch features a special power diagnosis test mode that is triggered automatically upon unit startup. During this 15 second test, the Multiswitch will operate in full load and will light the power-diagnosis led in green if the unit is supplied with suffcient power or in amber if not. A status led, located next to each output port, indicates the operating mode of the port (Legacy=solid green, Sky dSCR=blinking green, Power diagnosis=blinking red/green). Input level 78-103 dBuv. Packaging dimensions (W x D x H). 15.5 cm x 11.8 cm x 3.5 cm. 950 MHz 2150 MHz. 40 MHz 840 MHz. 4x Satellite IF inputs from Quattro LNB 1x DTT/DAB/FM input from Terrestrial antenna. 4x loopthrough satellite IF outputs 1x loopthrough terrestrial output 4x Sky dSCR (16UBs) / SatCR / Legacy auto-detect ports with combined Terrestrial signal. 50 dBm -5 dBm. Output signal level (AGC). 25 dBm (83 dBuV). RF isolation: satellite/terretsrial (input). RF isolation: satellite/satellite (input). RF isolation: satellite ch/ch (UBs, output). (loss) [amplification=OFF] +12 dB min. Gain: Unicable II (dCSS) output (out of AGC). 20 dB [amplification = OFF] -5 dB +5 dB [amplification = ON]. Sky dSCR (Sky Q), SatCR (Sky+), EN50949, EN50607, DiSEqC 1. X/DiSEqC 2.0, Legacy 13/18 V + 0/22 kHz. V/L => 13 V/0 kHz , V/H => 13 V/22 kHz H/L => 18 V/0 kHz , H/H => 18 V/22 kHz. 20 °C +50 °C. Product dimensions (W x D x H). 15.2 cm x 11 cm x 2.6 cm. Unicable II (dCSS) port specifications. User band (channel) bandwidth. User band (channel) gain ripple. User band (channel) frequencies. Unused ports need to be terminated by 75 Ohm DC-blocked terminators. The item “4 Way Inverto Sky Q Multiswitch DSCR UNICABLE CASCADE Satellite (2 DCSR)” is in sale since Monday, December 28, 2020. This item is in the category “Sound & Vision\TV Reception & Set-Top Boxes\Satellite Multiswitchers”. The seller is “tradeforce_uk” and is located in Margate. This item can be shipped to all countries in Europe, Antigua and barbuda, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Indonesia, Malaysia, Mexico, Singapore, South Korea, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guadeloupe, Grenada, French guiana, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Sri lanka, Macao, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El salvador, Trinidad and tobago, Uruguay, Viet nam.
- EAN: Does not apply
- Type: Aerial/Satellite Amplifiers & Distribution
- Number of Outputs: 4
- MPN: 16P-CUO4O-UST110-ISKY
- Brand: Inverto